Pouches Rock!

My second Wonderful Wallaby is off the needles. This one for my sister-in-law to give to a friend who is expecting a new baby in April. She requested it in pink … and since I was at the Black Sheep (teaching), I ran right back to the yarn room to see what was available in a baby-friendly pink that’s not too pink. (Because as much as I love pink for little girls, I also know that they get a lot … a LOT … of pink gifts.) And voila! I loved this one …

Ta-daaa! My yarn choice!

Ta-daaa! My yarn choice! Plymouth Yarn “Encore Tweed”

Knitting for babies and children really requires washable yarn. I sometimes break this rule … especially when I’m knitting for people who I know well. But when I am knitting for people I don’t know, I assume that they’ll want garments that are easy to care for. Thus, acrylic or blends are essential. The yarn I chose is Encore Tweed by Plymouth Yarn. It’s a worsted weight blend of 75% acrylic, 22% wool and 3% rayon. Stretchy, soft, washable … and a great price point at $7.50 a ball (I needed three. Color W464, Lot 67839.)

I decided to make the smallest size possible which is a 2T because if the baby is born in April, she will be 8 months old in December and with rolled up sleeves, this size will likely fit well with a little room for growth. I always put my children in sweaters that grew a little bit with them. Because I was knitting a gift, I did knit a swatch for gauge. If it was for me I might not have done that but I wanted it to be sized accurately. And away I went.

Bottom's UP!

Bottom’s UP!

This sweater is constructed from the bottom up and knit in the round. (Hear this, NO seams!) The instructions are very clear and easy to follow. Two needle sizes needed. Sleeves can be knit one- or two-at-a-time which is my preference so that they are sure to be the same size. I’m sorry that I didn’t take a photograph of my sleeves in process. On this particular pattern, I like using scraps of yarn to hold the few stitches for the underarms both on the body of the sweater and the sleeves. (Makes the “pits” very flexible.)

Here’s a great tip! If you start with the sleeves, you can consider them your swatch. For those who don’t like to swatch, you can start your project right off and if your gauge is off you have a lot fewer stitches to pull out.

Splitting up for the neckline

Splitting the stitches for the neckline … and then on to the collar and hood!

The sleeves are attached very simply by stitching them onto your needles along with the sweater body. Decreases all around for the shoulders and we’re getting closer and closer to a finished garment.

At the neckline, the stitches split and you knit back and forth for the neckline and hood (if you choose to add one … and I love children’s hats with hoods!) Again, very simple. The only “glitch” that I can see in the pattern is that there is a repeat of a few knitted stitches on the edge of the hood, which I am too much of a perfectionist to accept. So, I chose to knit all of the edge stitches on one side and purl all edge stitches on the other side. That way, I get a “perfect” edge. You’ll see what I mean when you knit this cutie!

At the end of the hood, you’ll graft all the stitches together with a Kitchener stitch and ta-daa!!! I added a tassel to the hood because I really liked the hassle that I added to the first WW that I knitted for my niece. All you have to do is graft the underarm stitches and all the seaming is done. Don’t you love that!? I sure do! Use a long piece of your seaming yarn to tighten up the “holes” at each side of the underarm. This is a trick you can use in lots of patterns.

IMG_0021

Just a few underarm stitches to graft … that’s it for seaming!

Underarm "holes" are easily tightened up!

Underarm “holes” are easily tightened up!

So, there you have it once again. The Wonderful Wallaby. I love this pattern so much that I am knitting one for myself in oatmeal-colored wool. You can be sure you’ll be seeing it when it’s on the needles!

Wonderful Wallaby in pink!

Wonderful Wallaby in pink!

Queen Bee Knits label is placed on the inside of the bottom … don't want it rubbing baby's neck!

Queen Bee Knits label is placed on the inside of the bottom … don’t want it rubbing baby’s neck!

Tassel … my addition

Tassel … my addition

Gone knitting.

Foiled … or Frogged Again!

IMG_2006

One side in process … double strand worsted weight yarn on size 6 US needles!

This summer I started knitting the most wonderful bag. My Friday Knitting teacher had one that I absolutely loved and, of course, I needed one, too! So, I bought the yarn they suggested and started knitting.

The pattern is called the “Just So Bag” by Andrea Babb and calls for Rowan Pure Wool Aran (Superwash). It was suggested to me that we could use Lambs Pride Worsted in its place. I wish I had been thinking about that – because the mohair in the Lambs Pride yarn makes it fuzzy. Duh! (And the worsted is a little bit heavier weight than the aran.)

The first parts to be knitted are knit with double strands of worsted weight wool. On fairly small needles. Hard on your hands! But I got them all done. And they look good!

But the lace ends of the bag (one needs to knit two) … another story all together! Ugh!

The lace end ... 2nd or 3rd attempt!

The lace end … 2nd or 3rd attempt! See the fuzz?

Today I frogged the lace end (I’ve only started one … and started and started again) for the third or fourth time. Ugh! I really need a bigger chart and I really need less fuzzy yarn. When you’re knitting lace (even if it’s worsted weight yarn) it really needs to be smooth so that the stitches are visible. These are somewhat blurred (and I helped by dropping a stitch that I could not recover.) Because of the mohair blended in, it’s very difficult to read my stitches and makes repairing a dropped stitch, or any other mistake (yes, I do make mistakes!) much more complicated than if it were plain wool. (Which is why the pattern calls for wool, BTW, and not a wool blend.)

So, I will start again but not until I have knitted something cute that I want to knit  … something relatively simple. Maybe the cute pair of striped fingerless mitts that I’ve been seeing. Or the felted slippers (I only bought the pattern ages ago!) Or the little sweater for Faye for Christmas. Or the headband for Libet. So many choices that I may have to just go have an adult beverage and a swim and call it a day! Tomorrow is Monday after all and I am back to work! This job has sure cut into my knitting time! 🙂

Gone …. well, maybe I’ll be knitting.

Re-Entry

I struggle every year when we have to leave Maine just in time for August in *gasp* Florida. The shock to my body and our culture is, well, shocking! The temperature has climbed from reasonable and comfortable to Oh My God, how can it be so hot that I can’t walk to the mailbox in bare feet? Even the pool in the back yard is not refreshing.

That said, while you’re all assuming that I am outside enjoying the sun down here (that’s what people in Florida do, right?) I’m really in my atelier, blinds closed, A/C and ceiling fans on, knitting and planning.

Today I’ve been working on a “basket” (bag) that I found somewhere on the internet that uses one skein of Malabrigo’s Rasta yarn. I’ve written about this yarn before but I have to reiterate just how much I love knitting with it. It’s super bulky and the color way that I have is rich purples and burgundies interjected with gold, green and orange (amongst others). Simply fabulous! And since it’s super bulky, it knits up in a flash.

The basket is an interesting construction. I couldn’t figure it out at first glance but I have really enjoyed watching the basket come along. It’s knit in the round on four DPNs but it comes out square! Very clever. I got the bottom of the basket done in an hour or so (after the hour or so that I took to realize that I wasn’t reading the directions correctly – and it was really me. Must be the heat!)  The pattern is called “Rasta Basket” by Kate Vanover and you can find it on Ravelry. I’ll add pictures to this post just as soon as it’s done.

Gone knitting!

Cabled Baby

The hats and booties are done and adorable … if this Queen Bee does says so herself!

The patterns were both found on Ravelry and the hat pattern was flawlessly written. The pattern is Heirloom Stitches’ Little Boy Blue Hat. It knits up a hat for a 12-24 month child. I think this is a great gift to give to a new baby … because people are apt to get teeny tiny clothes but not much for the baby when he or she gets a bit bigger.

The booties were a bit more difficult and had a couple of places where I had to go to work “fixing” the pattern. So, next time, when I have to make some booties, I’ll be writing my own pattern. The pattern, also from Ravelry, is called Seamless Cable Booties by Crumbgrubbers Knits. It’s a free download and I just noticed that there are comments that repair the “problems” – so, the problems were mine! LOL! I made one pair for a girl and one for a boy – if one can’t figure out which is which … well … ’nuff said!

Gone knitting!

 

Spud and Chloe Little Boy Blue Baby Hat – in progress

It must be time for a post about knitting! (Ya think!?)

Heirloom Stitches "Little Boy Blue Hat"

I’m making a baby hat for my sister to present as a baby gift for a friend (booties will be knitted to match). I bought a pattern and yarn in Cincinnati when I was there to be a back-up support for my kids. Who knew that I could love a yarn so much?

So, here are the details.

1. LYS – Fiberge in Montgomery, Ohio. Fiberge has changed hands and moved to a new location since I lived in Cincinnati. it’s still a nice little yarn shop, however. The selection of yarns is delicious – and I had a difficult time figuring out what I wanted to knit with. Always a good thing! I decided to be responsible and since I had just purchased a ball of really special novelty yarn here in Florida for me, I bought a pattern and yarn for one of my orders … which leads us to the pattern.

2. Pattern – Heirloom Stitches‘ Little Boy Blue Hat (you can find the pattern on Ravelry (Ravelry dot com) or on the designer’s site  … click here to be magically transported. It’s a really sweet classic Aran design with seed stitch (my favorite these days) and cables. Sized to fit a 12-24 month baby … always a good thing when you’re knitting for a new baby. They always get tons of tiny clothes and nothing to “save for later”. Anyway, I loved the pattern and it’s a breeze to knit! Pattern calls for US #7 needles and a yarn that Fiberge didn’t have but gauge is 5 sts = 1 inch. So, I picked …

3. Yarn – Oh. My. Goodness! I totally love the yarn that I chose to knit this hat! Spud & Chloe by Blue Sky Alpacas “Sweater Worsted” is a worsted weight superwash blend of 55% wool and 45% organic cotton. (They’re going to love that part in California!) Color is, again, that classic Aran ivory (color #7500 “Ice Cream” – love the name! – , lot # 0831). I simply love knitting with this yarn. It doesn’t split or pill and it’s so soft! The baby’s head will not be itchy at all and it’s knitting up to be so cute! I think I may be in love! 🙂

The hat takes a few hours to complete  – hey! I’m a purposeful knitter … each stitch is thoughtful and meditative. Therapeutic. Imbued with love and peace with wishes for health and happiness for the recipient.

I’ll post finished pictures later. But now, I’m gone knitting!